VIQ-853S

Simple B/W Real Time Quad (COMPACT UNIT)

• Individual camera gain controls




• Tape quad while viewing built-in sequential switcher




• Security lock out prevents un-authorized operation




• Alarm output trigger VCR alarm mode or external device




• External device or VCR can control duration of alarm




• On-screen contact alarm indication




• Alarm output normally open/normally closed adjustable




• When any camera's video signal, or power is cut, that particular quadrant's title will flicker on screen




• Gray scale test bar generator




• Alarm buzzer for sound warning

VIDEO SIGNAL FORMAT INPUT (CH1-4 OR 8/IN)	EIA / CCIR Compatible, monochrome only 1.0 Vp-p adjustable, 75 ohms terminated, 4 BNC
VIDEO OUTPUT (SWITCHED SW.	1.0 Vp-p full screen or quad switched output, 75 ohms, 1 BNC
BUILT-IN SEQUENTIAL SWITCHER	YES
SWITCHING INTERVAL	Adjustable from 0-99 second per channel (set 0 second for bypass)
QUAD	1.0 Vp-p, 75 ohms, 1 BNC
DIGITAL MEMORY FULL SCREEN QUADRANT	1027*480 (EIA) / 512 (CCIR) Pixels 512*240 (EIA) / 256 (CCIR) Pixels 8 bit, 256 Levels of gray scale
HORIZONTAL RESOLUTION	Min. 700 Pixels for full screen
PICTURE REFRESH RATE	1/15 per second
VIDEO IN	4 BNCs - One per camera (CH)
VIDEO OUT	2 BNCs - One Monitor / Switched (SW.) and one quad
ALARM COMMAND	9 Pin D-Sub connecotor (15 Pin-D-Sub connecotor for CQS-856) NC. C. NO. Contact output 1A / DC24V Max.
ALARM IN	4/8 Inputs, one per camera (CQS-853Z / 855Z / 856 Alarm in N.C. OR N.O. adjustable on screen)
ALARM OUT	Reset time adjustable from 1-99 seconds (CQS-853Z / 855\z / 856 adjustable on screen)
POWER SOURCE	12V DC / AC Auto switching, 1 Amp.
POWER CONSUMPTION	Less than 5 Watts
OPERATION TEMPERATURE	+40 degree F to +104 degree F (+5 degree C to +40 degree C)
DIMENSION	9-1/8(W) * 1-7/8(H) * 6-7/8(D) inch / 232 * 47* 75 mm
WEIGHT	3.72Lbs. / 1.685Kgs

CE

Packing:
10 Pcs/CTN; 18.00 kgs/19.50 Kgs/2.09'